LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - 5L40-E/5L50-E - Introduction & Repair Instructions) >> Repair Instructions >> Shift Control Knob Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Releasing Shift Knob Trim Ring
    GM891693Courtesy of GENERAL MOTORS CORP.
  1. Insert a flat bladed tool between the shift knob and the shift knob trim ring.
  2. Rotate the flat bladed tool to release the shift knob trim ring from the shift knob.
    3. Fig 2: Adjusting Shift Knob Retaining Screw
    GM891696Courtesy of GENERAL MOTORS CORP.
  3. Loosen the shift knob retaining screw 3 turns.
    4. Fig 3: View Of Shift Knob
    GM891699Courtesy of GENERAL MOTORS CORP.
  4. Remove the shift knob by pulling straight up off the shift control shaft.
scientia non olet · About LEMON Manuals