LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - 5L40-E/5L50-E - Introduction & Repair Instructions) >> Repair Instructions >> Auxiliary Automatic Transmission (AT) Oil Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of TOC Retainer Clip
    GM1350216Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: It is not necessary to discharge the refrigerant from the A/C system during auxiliary transmission oil cooler (TOC) replacement.
    Remove the A/C condenser mounting bolts and reposition the condenser.
  1. Reposition the condenser to access the auxiliary transmission oil cooler. Refer to Condenser Replacement (Heavy Duty Cooling) or Condenser Replacement (Standard Cooling) .
  2. Disconnect the transmission oil cooler (TOC) lines from the TOC.
  3. Disconnect the TOC line from the TOC retainer clip (1).
    4. Fig 2: View Of Transmission Oil Ccooler (TOC) Mounting Bolts
    GM1350217Courtesy of GENERAL MOTORS CORP.
  4. Remove the TOC mounting bolts.
  5. Remove the TOC.
scientia non olet · About LEMON Manuals