LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 4.6L (LH2) (2 Of 6)) >> On-Vehicle Repair Instructions - Part 1 >> Engine Mount Replacement - Right (w/RWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right (w/RWD)  or Engine Mount Bracket Replacement - Right (w/AWD) .
  3. Fig 1: View Of Right Engine Mount Retaining Nut - RWD
    GM1067556Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine mount retaining nut.
  5. Remove the engine mount from the vehicle.