Special Tools

WARNING: This page is about a different variant/trim than selected.

Special Tools

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	DT-47752 Split Plate Set
Courtesy of GENERAL MOTORS CORP.	J-2619-A Slide Hammer w/Adapter
Courtesy of GENERAL MOTORS CORP.	J 3289-20 Holding Fixture
Courtesy of GENERAL MOTORS CORP.	J 5590 Pinion Bearing Race Installer - Rear
Courtesy of GENERAL MOTORS CORP.	J 8092 Universal Driver Handle
Courtesy of GENERAL MOTORS CORP.	J 8107-2 Side Bearing Puller Pilot
Courtesy of GENERAL MOTORS CORP.	J 8433 Two Jaw Puller
Courtesy of GENERAL MOTORS CORP.	J 22888-20A Universal Two Jaw Puller
Courtesy of GENERAL MOTORS CORP.	J 24433 Pinion Cone and Side Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 29369-1 Bushing and Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 36850 Transjel Lubricant
Courtesy of GENERAL MOTORS CORP.	J 45548 Mainshaft Support Bushing/Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 46266 Bushing Installer
Courtesy of GENERAL MOTORS CORP.	J 46268 Output Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 46269 Input Seal Installer