LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 4.6L (LH2) (3 Of 6)) >> Repair Instructions (On-Vehicle - Part 2 And Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions - Part 2 >> Valve Rocker Arm Replacement - Right >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the right camshafts. Refer to Camshaft Replacement - Right .
    2. Fig 1: View Of Right Valve Rocker Arm
    GM928625Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLAs) and original location the components were assembled in.
  2. Remove the camshaft followers from the right cylinder head.
  3. Clean and inspect the rocker arms. Refer to Valve Rocker Arms Cleaning and Inspection .
scientia non olet · About LEMON Manuals