LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 4.6L (LH2) (3 Of 6)) >> Repair Instructions (On-Vehicle - Part 2 And Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions - Part 2 >> Valve Lifter Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the left valve rocker arms. Refer to Valve Rocker Arm Replacement - Left .
    2. Fig 1: View Of Left Valve Lifter
    GM928427Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLA) and original location the components were assembled in.
  2. Remove the SHLA from the left cylinder head bores.
  3. Clean and inspect the valve lifters. Refer to Valve Lifters Cleaning and Inspection .
scientia non olet · About LEMON Manuals