LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 4.6L (LH2) (3 Of 6)) >> Repair Instructions (On-Vehicle - Part 2 And Off-Vehicle - Part 1) >> Off-Vehicle Repair Instructions - Part 1 >> Valve Lifter Removal - Left

Valve Lifter Removal - Left

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Left Valve Lifter
    GM928427Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Valve Lifter Priming Notice in Cautions and Notices.
    IMPORTANT: Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLAs) and original location the components were assembled in.
  1. Remove the stationary hydraulic lash adjuster (SHLAs) from the left cylinder head lifter bores.
  2. Store the camshafts, followers and SHLAs in a clean, secure location.
scientia non olet · About LEMON Manuals