LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 4.6L (LH2) (3 Of 6)) >> Repair Instructions (On-Vehicle - Part 2 And Off-Vehicle - Part 1) >> Off-Vehicle Repair Instructions - Part 1 >> Drive Belt Removal >> Inner Drive Belt

Inner Drive Belt

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Drive Belt Tensioner & Pulleys
    GM284263Courtesy of GENERAL MOTORS CORP.
  1. Insert a 1/2-inch drive extension into the drive belt tensioner.
  2. Push down on the extension to release tension.
  3. Remove the drive belt from the generator.
  4. Slowly return the drive belt tensioner to the original position.
    5. Fig 2: View Of Inner Drive Belt
    GM1346183Courtesy of GENERAL MOTORS CORP.
  5. Remove the inner drive belt.
scientia non olet · About LEMON Manuals