LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System - 4.6L (LH2) - Introduction) >> Description and Operation >> Electronic Ignition (EI) System Description >> Crankshaft Reluctor Wheel

Crankshaft Reluctor Wheel

WARNING: This page is about a different variant/trim than selected.

The crankshaft reluctor wheel is part of the crankshaft. The reluctor wheel consists of 58 teeth and a reference gap. Each tooth on the reluctor wheel is spaced 6 degrees apart with a 12-degree space for the reference gap. The reference gap is used to determine the crankshaft position (CKP), while the other teeth provide cylinder location during a revolution.

scientia non olet · About LEMON Manuals