LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Frame, Trim Cover, Heater, Pad, Blower, Power Adjuster Control Module Replacement - Front Seat Cushion

Frame, Trim Cover, Heater, Pad, Blower, Power Adjuster Control Module Replacement - Front Seat Cushion

Fig 1: View Of Front Seat Cushion Frame, Trim Cover, Heater, Pad, Blower & Power Adjuster Control Module
GM1481729Courtesy of GENERAL MOTORS CORP.
Frame, Trim Cover, Heater, Pad, Blower, Power Adjuster Control Module Replacement - Front Seat Cushion

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
Front Seat Cushion Frame Assembly Replacement 
Preliminary Procedure: 
Remove the front seat. Refer to Seat Replacement - Bucket .
1 Frame Assembly, Front Seat Cushion
Tip:  Disconnect the electrical connectors.
Front Seat Cushion Cover Assembly Replacement 
Preliminary Procedure: 
Remove the front seat. Refer to Seat Replacement - Bucket .
1 Frame Assembly, Front Seat Cushion
Tip:  Disconnect the electrical connectors.
2 Cover Assembly, Front Seat
Front Seat Cushion Climate Control Heated Ventilated 
Preliminary Procedure: 
Remove the front seat. Refer to Seat Replacement - Bucket .
1 Frame Assembly, Front Seat Cushion
Tip:  Disconnect the electrical connectors.
3 Climate Control Heat Ventilated Assembly, Front Seat Cushion
Front Seat Cushion Pad Assembly Replacement 
Preliminary Procedure: 
Remove the front seat. Refer to Seat Replacement - Bucket .
1 Frame Assembly, Front Seat Cushion
Tip:  Disconnect the electrical connectors.
4 Pad Assembly, Front Seat Cushion
Front Seat Cushion Blower Assembly Replacement 
Preliminary Procedure: 
Remove the front seat. Refer to Seat Replacement - Bucket .
1 Frame Assembly, Front Seat Cushion
Tip:  Disconnect the electrical connectors.
5 Screw, Module Blower
6 Blower Assembly, Front Seat Cushion
Tip:  Disconnect the electrical connectors.
Front Seat Memory Adjuster Module Assembly Replacement 
Preliminary Procedure: 
Remove the front seat. Refer to Seat Replacement - Bucket .
1 Frame Assembly, Front Seat Cushion
Tip:  Disconnect the electrical connectors.
7 Module Assembly, Front Seat Adjuster Memory
Tip:  Disconnect the electrical connectors.