Transmission Oil Pump Body Assemble

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 38693 Oil Pump Seal Installer. See Special Tools .

Fig 1: Installing Torque Converter Oil Seal Assembly Using J 38693

Courtesy of GENERAL MOTORS CORP.

Using the J 38693 , install the torque converter oil seal assembly (201). See Special Tools .

Fig 2: View Of Oil Pump Drive Gear & Driven Gear

Courtesy of GENERAL MOTORS CORP.

Lubricate the oil pump drive gear (205) and driven gear (204) with DEXRON® III automatic transmission fluid.

IMPORTANT: The identification dots on the oil pump drive gear (205) must be facing up in order to ensure correct orientation of the drive flats.

Install the oil pump driven gear (204) and drive gear (205) with the identification dots facing up.