Torque Converter Assembly Removal
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission torque converter assembly.
- Inspect the torque converter assembly for the following:
- External damage
- Metal particles found after flushing the oil cooler and the cooler lines
- External leaks in the hub weld area
- The torque converter pilot is damaged or fits poorly into the crankshaft
- Internal failure of the stator roller clutch
- Contamination from the engine coolant
- Excessive end play (Refer to Torque Converter End Play Inspection ).