LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Automatic Transmission - 4L80-E/4L85-E - Overhaul) >> Repair Instructions >> Third and Fourth Clutch Accumulator Housing Assemble

Third and Fourth Clutch Accumulator Housing Assemble

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing 3rd Clutch Accumulator Piston & Seals
    GM40611Courtesy of GENERAL MOTORS CORP.
  1. Install the 3rd clutch accumulator piston inner (406) and outer (404) seals. Lubricate the seals (404, 406) with DEXRON® III automatic transmission fluid.
  2. Install the 3rd clutch accumulator piston (405) into the 3rd and 4th clutch accumulator housing (51).
  3. Fig 2: Installing 4th Clutch Accumulator Piston Assembly
    GM56547Courtesy of GENERAL MOTORS CORP.
  4. Install the 4th clutch accumulator piston seal (404). Lubricate the seal (404) with DEXRON® III automatic transmission fluid.
  5. Assemble the 4th clutch accumulator piston pin (408) with the 4th clutch accumulator piston (407).
  6. Install the 4th clutch accumulator piston assembly.
  7. Install the 4th clutch accumulator piston pin retainer ring (402).