LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Automatic Transmission - 4L80-E/4L85-E - Overhaul) >> Repair Instructions >> Speed Sensor Assembly Installation

Speed Sensor Assembly Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Input & Output Speed Sensors
    GM181639Courtesy of GENERAL MOTORS CORP.
  1. Install the input and output speed sensors (22), (output speed sensor plug-4WD) into the transmission case.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the input and output speed sensor bolts (23).

    Tighten:  Tighten the bolts to 11 N.m (97 lb in).