LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Automatic Transmission - 4L80-E/4L85-E - Overhaul) >> Repair Instructions >> Overdrive Carrier Assemble

Overdrive Carrier Assemble

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Overdrive Carrier Assembly, Overrun Clutch Housing Assembly & Overdrive Clutch Roller Assembly
    GM774707Courtesy of GENERAL MOTORS CORP.
  1. Install the overdrive clutch roller assembly (512) on the overrun clutch housing assembly (504).
    2. IMPORTANT: Rotate the overdrive carrier assembly (514) during installation in order to line up the overdrive clutch plates with the overdrive carrier assembly splines.
  2. Install the overdrive carrier assembly (514) on the overrun clutch housing assembly (504).
    3. Fig 2: Installing Overdrive Carrier Retainer Ring On Turbine Shaft
    GM31185Courtesy of GENERAL MOTORS CORP.
    NOTE: Align components carefully to avoid damaging the turbine shaft oil seal rings.
  3. Install the turbine shaft (502) through the overrun clutch housing assembly (504) and the overdrive carrier assembly (514).
  4. Install the overdrive carrier retainer ring (522).
scientia non olet · About LEMON Manuals