Manual Shift Shaft Removal
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the manual shift shaft pin (709).
- Remove the manual shift shaft detent lever nut (712).
- Remove the manual shift shaft (708).
- Remove the manual shift shaft seal (707).
- Inspect the manual shift shaft for the following conditions:
- Damaged flats or threads
- Burrs
- Wear
- Inspect the manual shift shaft pin (709) for tightness.
NOTE:
Use a piece of wood or other protective material when you remove the manual shaft pin, to prevent damage to the case.