LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Automatic Transmission - 4L80-E/4L85-E - Overhaul) >> Repair Instructions >> Low and Reverse Band Servo Assembly Removal

Low and Reverse Band Servo Assembly Removal

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Low & Reverse Band Servo Cover
    GM28388Courtesy of GENERAL MOTORS CORP.
  1. Remove the low and reverse band servo cover bolts (61).
  2. Remove the low and reverse band servo cover (62).
  3. Remove the low and reverse band servo cover gasket (63).
  4. Inspect the low and reverse band servo cover (62) for damage.
    5. Fig 2: View Of Low & Reverse Band Servo Assembly & Accumulator Piston Spring
    GM28389Courtesy of GENERAL MOTORS CORP.
  5. Remove the low and reverse band servo assembly (64-73).
  6. Remove the low and reverse accumulator piston spring (74) from the transmission case.
  7. Inspect the low and reverse band servo transmission case bore for wear and scoring.
  8. Inspect the low and reverse accumulator piston spring (74) for distortion.
scientia non olet · About LEMON Manuals