LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Automatic Transmission - 4L80-E/4L85-E - Overhaul) >> Repair Instructions >> Low and Reverse Band Removal

Low and Reverse Band Removal

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inspecting Center Support Spacer, Selective Thrust Washer & Low/Reverse Band Assembly
    GM334770Courtesy of GENERAL MOTORS CORP.
  1. Remove the center support spacer (643).
    2. IMPORTANT: The thrust washers may be stuck to the output shaft and gear unit assembly or to the bottom of the transmission case.
  2. Remove the selective thrust washer (674) from the transmission case.
  3. Remove the low and reverse band assembly (657).
  4. Inspect the low and reverse band assembly (657) and the selective thrust washer (674) for wear and damage.
scientia non olet · About LEMON Manuals