LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Automatic Transmission - 4L80-E/4L85-E - Overhaul) >> Repair Instructions >> Intermediate Clutch Assembly Installation

Intermediate Clutch Assembly Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Intermediate Clutch Plates
    GM334809Courtesy of GENERAL MOTORS CORP.
  1. Dip all of the intermediate clutch plates in DEXRON® III transmission fluid.
  2. Install the intermediate clutch wave plate (684) with the tangs facing down.
    3. IMPORTANT: Alternate the clutch plates, starting with the steel clutch plate (4 steel and 4 composite).
  3. Install the intermediate clutch plates (631, 632).
  4. Install the intermediate clutch backing plate (630).
    5. Fig 2: Installing Intermediate Clutch Backing Plate Retainer Ring
    GM334811Courtesy of GENERAL MOTORS CORP.
  5. Install the intermediate clutch backing plate retainer ring (629). The opening of the retainer ring (629) should be at the 9 o'clock position.
scientia non olet · About LEMON Manuals