LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Automatic Transmission - 4L80-E/4L85-E - Overhaul) >> Repair Instructions >> Fourth Clutch Plate Installation

Fourth Clutch Plate Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Fourth Clutch Plates
    GM335064Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Alternate the fourth clutch plates (525, 526), starting with a steel clutch plate (526) (4 steel, 4 composite). Install the fourth clutch steel plates (526) with the V notch tang at the 1 o'clock position in the fourth clutch housing.
  1. Install the fourth clutch plates (525, 526) into the fourth clutch housing (529).
  2. Install the fourth clutch backing plate (524). Align the notched tab of the fourth clutch backing plate (524) over the anchor pin in the case.
    3. Fig 2: Installing Fourth Clutch Backing Plate Retainer Ring
    GM335065Courtesy of GENERAL MOTORS CORP.
  3. Install the fourth clutch backing plate retainer ring (523).
scientia non olet · About LEMON Manuals