Forward Clutch Hub Assemble

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 GMC Yukon XL, 2005 GMC Sierra, 2005 GMC Savana Special, 2005 GMC Savana Camper Special, and 2005 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 36850 Assembly Lubricant

Fig 1: View Of Direct Clutch Hub & Retainer Ring

Courtesy of GENERAL MOTORS CORP.

Remove the direct clutch hub retainer ring (616).
Remove the direct clutch hub (615).

Fig 2: Identifying Direct & Forward Clutch Housing Thrust Washers & Forward Clutch Hub

Courtesy of GENERAL MOTORS CORP.

Install the forward clutch housing thrust washer (612) (bronze) on the inside of the forward clutch hub (613). Retain the thrust washer with J 36850 or equivalent.
Install the direct clutch housing thrust washer (614) (plastic) on the outside of the forward clutch hub (613). Retain the thrust washer with J 36850 or equivalent.

Fig 3: View Of Forward Clutch Hub, Hub Retainer Ring & Housing Assembly

Courtesy of GENERAL MOTORS CORP.

Install the forward clutch hub (613) into the forward clutch housing assembly (602). Rotate the hub slightly in each direction in order to ease installation.
Install the direct clutch hub (615) into the forward clutch housing assembly (602).
Install the direct clutch hub retainer ring (616).