LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Transfer Case - NVG 246-NP8) >> Repair Instructions >> Transfer Case Shift Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 GMC Yukon, 2005 Chevrolet Tahoe, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Shift Control Module
    GM856631Courtesy of GENERAL MOTORS CORP.
  1. If a NEW control module is being installed, program the new module. Refer to Control Module References in Computer/Integrating Systems.
  2. Install the shift control module to the bracket.
    3. Fig 2: Shift Control Module Electrical Connectors
    GM885116Courtesy of GENERAL MOTORS CORP.
  3. Connect the shift control module electrical connectors.
  4. Start the engine and test the automatic transfer case system for proper shift operation.
scientia non olet · About LEMON Manuals