Diagnostic Starting Point - Transfer Case
WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 GMC Yukon, 2005 Chevrolet Tahoe, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Begin the system diagnosis with the Diagnostic System Check - Vehicle in Vehicle DTC Information. The Diagnostic System Check - Vehicle in Vehicle DTC Information will provide the following information:
- The identification of the control module or modules that command the system.
- The ability of the control modules or modules to communicate through the serial data circuit.
- The identification of any stored diagnostic trouble code (DTCs) and the status of the codes.
The use of the Diagnostic System Check - Vehicle in Vehicle DTC Information will identify the correct procedure for diagnosing the system and where the procedure is located.