Circuit Description
WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 GMC Yukon, 2005 Chevrolet Tahoe, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
The transfer case encoder is an analog sensor that returns a signal that represents the physical position of the transfer case sector shaft. This signal represents the mode or position that the transfer case is currently in. This sensor is made up of the following 3 circuits:
- 5-volt reference circuit
- Encoder signal circuit
- Encoder low reference circuit
This DTC detects an out of range reading from the encoder signal, a short to voltage on the 5-volt reference circuit.