LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Engine Mechanical - 8.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Sight Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Sight Shield
    GM843779Courtesy of GENERAL MOTORS CORP.
  1. Unsnap the intake manifold sight shield from the stud.
  2. Remove the sight shield from the sight shield bracket.
  3. Remove the sight shield bracket retainer nuts (1), if necessary.
  4. Remove the sight shield bracket from the studs (2), if necessary.
scientia non olet · About LEMON Manuals