LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Engine Mechanical - 8.1L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Water Crossover Cleaning and Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Water Outlet, Bolts, Thermostat & Coolant Crossover
    GM1309968Courtesy of GENERAL MOTORS CORP.
  1. Inspect the water crossover (308) for the following:
    • Corrosion or damage to the gasket sealing surfaces
    • Corrosion or damage to the bypass hose fitting
    • Corrosion or damage to the heater hose fitting
    • Corrosion or damage to the threads of the water outlet
  2. Inspect the thermostat housing (311) for corrosion or damage.