LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Engine Control System - 8.1L (DTC P0601 To U0107)) >> Diagnostic Information and Procedures >> DTC P2A01 or P2A04 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. This diagnostic concludes within 15.5 minutes.
  2. The PCM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 did not transition below 349 mV and above 710 mV during the passive test.
  3. One of the following tests fail:
    • Lean Intrusive Test
      • The PCM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 is more than 349 mV for 60 seconds.
      • The HO2S bank 1 sensor 1 and HO2S bank 2 sensor 1 is less than 300 mV.

        OR

    • Rich Intrusive Test
      • The PCM detects that the HO2S bank 1 sensor 2 or HO2S bank 2 sensor 2 is less than 710 mV for 60 seconds.
      • The HO2S bank 1 sensor 1 and HO2S bank 2 sensor 1 is more than 600 mV.