LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Automatic Transmission - 4L80-E/4L85-E - Introduction, Specifications & Repair Instructions) >> Repair Instructions >> Transmission Fluid Auxiliary Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Auxiliary Oil Cooler Bolts & Push Pins
    GM711677Courtesy of GENERAL MOTORS CORP.
  1. Remove the grille assembly. Refer to Grille Replacement (Cadillac) or Grille Replacement (Avalanche) or Grille Replacement (Chevrolet) or Grille Replacement (GMC) in Exterior Trim.
  2. Remove the transmission fluid cooler hoses from the auxiliary cooler. Refer to Transmission Fluid Cooler Line Quick Connect Fitting .
  3. Remove the auxiliary oil cooler bolts (1).
  4. Remove the auxiliary oil cooler push pins (2)
  5. Remove the auxiliary oil cooler from the vehicle.
scientia non olet · About LEMON Manuals