LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Automatic Transmission - 4L80-E/4L85-E - Introduction, Specifications & Repair Instructions) >> Repair Instructions >> Accumulator Housing Replacement >> Third and Fourth Clutch Accumulator Assembly

Third and Fourth Clutch Accumulator Assembly

WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 3rd Clutch Accumulator Piston & Seals
    GM477676Courtesy of GENERAL MOTORS CORP.
  1. Install the 3rd clutch accumulator piston inner (3) and outer (1) seals. Lubricate the 3rd clutch accumulator piston seals (1, 3) with DEXRON® III automatic transmission fluid.
  2. Install the 3rd clutch accumulator piston (2).
    3. Fig 2: View Of 4th Clutch Accumulator Piston & Components
    GM477680Courtesy of GENERAL MOTORS CORP.
  3. Install the 4th clutch accumulator piston seal (3). Lubricate the 4th clutch accumulator piston seal (3) with DEXRON® III automatic transmission fluid.
  4. Assemble the 4th clutch accumulator piston pin (2) with the 4th clutch accumulator piston (4).
  5. Install the 4th clutch accumulator piston assembly into the accumulator housing (1).
  6. Install the 4th clutch accumulator piston pin retainer ring (5) onto the 4th clutch accumulator piston pin (2).
scientia non olet · About LEMON Manuals