LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Engine Control System - 8.1L - Introduction) >> Repair Instructions >> Evaporative Emission (EVAP) Canister Vent Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of EVAP CVS Electrical Connector & CVS Bracket
    GM1224403Courtesy of GENERAL MOTORS CORP.
  1. If necessary, install and connect the CVS line. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  2. Install the CVS and line.
  3. Engage the retaining tab on the CVS bracket (2).
  4. Connect the CVS quick connect fitting at the canister. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  5. Connect the EVAP CVS electrical connector (1).
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals