Removal Procedure
CAUTION:
Refer to SIR Caution
in Cautions and Notices.
- Remove the Instrument Panel (IP) upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Standard Models) or Trim Pad Replacement - Instrument Panel (I/P) Upper (WC2/WC8) .
- Remove the screw holding the cluster trim panel and the passenger trim panel together.
- Remove the screws from the outside edges of the IP cluster trim panel (1).
- Disconnect the Driver Information Center (DIC) electrical connectors.
- Remove the IP cluster trim panel (1).