LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

    Fig 1: View Of IP Cluster Trim Panel
    GM517251Courtesy of GENERAL MOTORS CORP.
  1. Engage the lower edge of the IP cluster trim plate (1) to the IP.
  2. Connect the electrical connectors to the DIC switches.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the IP cluster trim panel (1) screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb. in.).

    4. Fig 2: Identifying Cluster Trim Panel To Passenger Trim Panel Screw
    GM800704Courtesy of GENERAL MOTORS CORP.
  4. Install the screw securing the IP cluster bezel to the passenger trim panel.

    Tighten:  Tighten the screws to 2 N.m (18 lb. in.).

  5. Install the Upper Trim Pad Trim Pad Replacement - Instrument Panel (I/P) Upper (Standard Models)  or Trim Pad Replacement - Instrument Panel (I/P) Upper (WC2/WC8) 
scientia non olet · About LEMON Manuals