LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Storage Compartment Replacement - Instrument Panel (I/P) >> Installation Procedure

Installation Procedure

    Fig 1: View Of IP Storage Compartment Screws
    GM493834Courtesy of GENERAL MOTORS CORP.
  1. When installing a new IP storage compartment the original lock cylinder will need to transferred to the new IP storage compartment. Refer to Lock Cylinder Replacement - Instrument Panel (I/P) Compartment Door .
  2. Partially install the IP storage compartment to the IP.
  3. Connect the electrical connections.
  4. Guide the IP storage compartment lamp through the opening in the IP storage compartment.
  5. Install the IP storage compartment to the IP.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the screws (1, 2).

    If vehicle is equipped with a CD changer, do not install the 2 upper screws (2) at this time.

    Tighten:  Tighten screws to 2 N.m (18 lb. in.).

  7. Install the IP compartment lamp. Refer to Instrument Panel (I/P) Storage Compartment Lamp Replacement in Lighting Systems.
  8. Install the CD changer, if equipped. Refer to Remote CD Changer Replacement in Entertainment.
  9. Install the knee bolster. Refer to Knee Bolster Replacement - Right .
  10. Inspect the IP storage compartment for proper operation.
scientia non olet · About LEMON Manuals