LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Lock Cylinder Replacement - Instrument Panel (I/P) Compartment Door >> Removal Procedure

Removal Procedure

    Fig 1: View Of IP Storage Compartment Door Compensator
    GM751039Courtesy of GENERAL MOTORS CORP.
  1. Remove the IP storage compartment. Refer to Storage Compartment Replacement - Instrument Panel (I/P) 
  2. Remove the IP storage compartment door compensator (1) from the alignment pin.
    3. Fig 2: Identifying IP Storage Compartment Door Trim Panel Screws
    GM751040Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws (1) from the IP storage compartment door trim plate (2).
  4. Remove the IP storage compartment door trim plate (2).
    5. Fig 3: View Of IP Storage Compartment Door Handle Screws
    GM751038Courtesy of GENERAL MOTORS CORP.
  5. Remove the screws (1) securing the IP storage compartment door handle (2) to the IP storage compartment door.
    6. Fig 4: Identifying Compartment Latch Actuator Cable
    GM751037Courtesy of GENERAL MOTORS CORP.
  6. Disengage the actuator cable (1) from IP storage compartment latch.
    7. Fig 5: Identifying the Compartment Handle
    GM751035Courtesy of GENERAL MOTORS CORP.
  7. Remove the lock cylinder from the IP storage compartment latch handle:
    1. Insert the key into the door handle lock cylinder.
    2. Turn the key 1/4 turn clockwise to LOCK position.
    3. Insert a small diameter tool into the small rectangular opening on the RH side of the door handle.
    4. Depress and hold the lock cylinder retainer.
    5. Turn the key an additional 1/4 turn clockwise.
    6. Remove the key and lock cylinder as an assembly.
scientia non olet · About LEMON Manuals