Installation Procedure
- Install the console armrest latch to the console armrest.
- Install the screws that retain the console armrest latch to the console armrest.
Tighten: Tighten the screw that retains the front door trim plate to 2 N.m (18 lb. in.)
- Install the armrest inner trim panel (2).
- Install the armrest inner trim panel screws (1).
Tighten: Tighten the screw that retains the front door trim plate to 2 N.m (18 lb. in.)
- Check for proper operation of the console armrest latch, adjust the console lid latch if necessary.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.