Installation Procedure

Fig 1: Identifying Mobile Telephone Storage Tray & Console Tray

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws that retain the console lid latch to the console tray.
Tighten: Tighten the screw that retains the front door trim plate to 2 N.m (18 lb. in.)
Install the console tray insert (1) to the console tray (2).

Fig 2: View Of Console Tray

Courtesy of GENERAL MOTORS CORP.

Install the 4 screws (1) that retain the console insert tray to the console tray (2).
Tighten: Tighten the screw that retains the front door trim plate to 2 N.m (18 lb. in.)
Check for proper operation of the console door latch, adjust the console lid latch if necessary.