LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement - Left (UV2) >> Removal Procedure

Removal Procedure

IMPORTANT: The knee bolster trim panel must be replaced, not repaired, if there is any visible damage.
    Fig 1: View Of Head Up Display Switch & Electrical Connector
    GM520019Courtesy of GENERAL MOTORS CORP.
  1. Remove the knee bolster trim panel by grasping at the top and the bottom and by pulling rearward.
  2. Disconnect the night vision switch electrical connector (2).
  3. Remove the knee bolster trim from the vehicle.
scientia non olet · About LEMON Manuals