Removal Procedure
- Remove the auxiliary HVAC control from the center console. Refer to HVAC Control Module Replacement - Auxiliary in HVAC Systems - Automatic.
- Remove the upper screws (1).
- Remove the lower screws (2).
- Remove the center console rear cover (3).
- Open the console compartment door.
- Use a flat bladed tool in order to remove the inner auxiliary HVAC outlet (2).
- Remove the cellular telephone, if equipped with UV8. Refer to Cellular Telephone Docking Station Replacement (DeVille and DHS) or Cellular Telephone Docking Station Replacement (DTS) in Cellular Communications.
- Remove the screws (1) from the console door hinge.
- Remove the console door and hinge assembly from the center console.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.