Installation Procedure
- Align the console lid and hinge assembly to the center console.
The console hinge has alignment pins next to the top hinge screws.
- Install the hinge screws (1).
Tighten: Tighten the screws to 1.6 N.m (14 lb. in.).
- Install the cellular telephone storage tray, if equipped with UV8. Refer to Cellular Telephone Docking Station Replacement (DeVille and DHS) or Cellular Telephone Docking Station Replacement (DTS) in Cellular Communications.
- Install the inner auxiliary HVAC outlet (2).
- Close the console compartment door.
- Install the center console rear cover (3).
- Install the rear cover screws (1, 2).
Tighten: Tighten the screws to 1.6 N.m (14 lb. in.).
- Install the auxiliary HVAC control. Refer to HVAC Control Module Replacement - Auxiliary in HVAC Systems - Automatic.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.