Installation Procedure
- Connect the electrical connector, if equipped.
- Install the center compartment (1).
- Install the four fasteners (2) that retain the center storage compartment (1).
Tighten: Tighten the fasteners (2) to 9 N.m (80 lb. in.).
- Install the left knee bolster. Refer to Knee Bolster Replacement - Left (Without UV2) or Knee Bolster Replacement - Left (UV2) .
- Install the right knee bolster. Refer to Knee Bolster Replacement - Right .
NOTE:
Refer to Fastener Notice in Cautions and Notices.