Removal Procedure

IMPORTANT:

Do not remove the night vision bracket except for replacement.
If the night vision camera is removed or adjusted for any reason, it must be aimed. Refer to Night Vision Camera Aiming .

Fig 1: View Of Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Fig 2: View Of Three Camera Retainers

Courtesy of GENERAL MOTORS CORP.

Turn the three camera retainers (1) 90 degrees and remove the camera from the mounting bracket.

Fig 3: View Of Night Vision Bracket Fasteners

Courtesy of GENERAL MOTORS CORP.

Remove the fasteners from the night vision camera bracket in order to remove the camera bracket from the hood latch bracket.