Fuel Used
The fuel used parameter is the amount of fuel that has been used since the parameter was last reset. The fuel used parameter is displayed on the DIC in one of the following formats:
- XX.X GAL FUEL USED
- XXX.X L FUEL USED
The XXX.X represents the calculated fuel used value. The units of the display will correspond to the current IPC setting. The DIC will display a range from 0.0 to 99.9 GAL in the English mode and from 0.0 to 999.9 L for the metric mode. When FUEL USED is displayed on the DIC, briefly pressing the INFO RESET button on the DIC will reset the fuel used parameter.