LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> CTS V >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel (I/P) Carrier Replacement >> Installation Procedure

Installation Procedure

  1. Install the carrier assembly.
    2. Fig 1: View Of Carrier Nuts
    GM788231Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts securing the carrier to the cowl.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Install the nuts securing the carrier to the firewall under the A pillar.

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

  4. Connect all electrical wire retainers to the carrier assembly.
    5. Fig 2: View Of Pedal Bracket Nuts
    GM836289Courtesy of GENERAL MOTORS CORP.
  5. On vehicles with a manual shift transmission, loosen the nuts (2) on the pedal bracket.

    Tighten:  Tighten the nuts to 25 N.m (18 lb ft).

  6. Install the parking brake pedal assembly. Refer to Park Brake Pedal Assembly Replacement (LHD) or Park Brake Pedal Assembly Replacement (RHD) in Park Brake.
    7. Fig 3: View Of Brake Pedal Bracket Nuts
    GM786925Courtesy of GENERAL MOTORS CORP.
  7. Install the 2 nuts (1) securing the brake pedal bracket to the cowl.

    Tighten:  Tighten the nuts to 25 N.m (18 lb ft).

  8. Install the HVAC ducts. Refer to Air Outlet Duct Replacement - Instrument Panel (I/P) - Upper Left , Air Outlet Duct Replacement - Instrument Panel (I/P) - Upper Right , and Defroster Duct Replacement - Windshield in Heating, Ventilation and Air Conditioning.
  9. Install the I/P retainer. Refer to Instrument Panel (I/P) Retainer Replacement .
scientia non olet · About LEMON Manuals