Scan Tool Output Controls
Instrument Panel Cluster (IPC)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Display(s) Test | Output Control | The IPC illuminates all of the display segments and sweeps all gages when you select On. |
| Cluster Dimming | Output Control | The IPC dims from 0-100% when you select INCREASE or DECREASE by 20% increments. |
Engine Control Module (ECM) - 2.8L/3.6L
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Fuel Pump Relay | Engine Output Controls | The ECM commands the fuel pump relay on and off. |
| MIL | Dash Lamps | The ECM commands the MIL indicator on and off. |
| Service Vehicle Soon (SVS) Lamp | Dash Lamps | The ECM commands the SVS indicator on and off. |
Powertrain Control Module (PCM) - 5.7 L
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Fuel Gage | Engine Output Controls | The PCM sweeps the fuel gage when On is selected. |
| Oil Life Reset | Engine Output Controls | The PCM resets the engine oil life to 0% and back to the original value when commanded |