LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> XLR >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

  1. Connect the IPC electrical connector.
  2. Position the IPC to the steering column bracket.
    3. Fig 1: View Of IPC & Screws
    GM1224708Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws which retain the IPC to the steering column bracket.

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

  4. Connect the HUD electrical connector to the IPC.
  5. Install the I/P trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) .
  6. Connect the negative battery cable.

    Tighten:  Tighten the bolt to 15 N.m (11 lb ft).

scientia non olet · About LEMON Manuals