Chime Always On
Chime Always On
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Audible Warnings Schematics | |||
| 1 | Did you perform the Vehicle Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 | Turn ON the ignition. Are any indicators/messages illuminated? |
Go to Indicator/Warning Message Description and Operation | Go to Step 3 |
| 3 |
|
Go to Step 4 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
| 4 |
IMPORTANT:
Perform the programming procedure for the BCM. Replace the BCM. Refer to Body Control Module Replacement
in Computer/Integrating Systems.Did you complete the replacement? |
Go to Step 5 | - |
| 5 |
|
System OK | Go to Step 1 |