LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory Right (RHD) >> Removal Procedure

Removal Procedure

    Fig 1: Identifying the Screw Near the I/P Connector at the I/P Connector
    GM298116Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in SIR.
  2. Remove the instrument panel (I/P) upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
  3. Remove the I/P cluster trim panel. Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  4. Remove the screw near the I/P cluster at the I/P retainer.
  5. Pull rearward on the trim panel in order to disengage the three retainers, and remove the trim plate.
scientia non olet · About LEMON Manuals