Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in SIR.
- Remove the instrument panel (I/P) upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
- Remove the I/P cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
- Remove the screws from the accessory trim panel.
- Remove the PSIR module. Refer to Inflatable Restraint Instrument Panel Module Replacement in SIR.
- Remove the two screws from the straps at the carrier.
- Pull rearward on the trim panel in order to disengage the three retainers, and remove the trim plate.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.