Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in SIR.
- Remove the instrument panel (I/P) upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
- Remove the I/P cluster trim panel. Trim Panel Replacement - Instrument Panel (I/P) Cluster .
- Remove the screw near the I/P cluster at the I/P retainer.
- Lift the outboard end of the trim plate in order to disengage the locating tab, then pull the trim plate rearward.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.