LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory Left (LHD) >> Installation Procedure

Installation Procedure

    Fig 1: View of Trim Panel & I/P Retainer
    GM287707Courtesy of GENERAL MOTORS CORP.
  1. Align the trim panel with the I/P retainer.
  2. Push forward on the trim plate in order to engage the three retainers, while aligning the A/C housing with the A/C ducts.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Install the I/P cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  5. Install the instrument panel (I/P) upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in SIR.
scientia non olet · About LEMON Manuals